My Basket

Close

The FILTH Station - Freestanding

£410.00
FS.FS-1B

Sorry this item is currently out of stock. Please contact us if you have any questions

Description

A freestanding version of the FILTH Station – a mounting station for finger boards, climbing holds and training products - with a made to measure height, just for you.

The standard frame comes with one FILTH mounting board on the front face, but if you would like a stepped/off-set training face just add a second board for just £19.00.

The extra board can go on the rear face to allow for a staggered training configuration (standard as shown), back to back with the front face, or just request the second board to be the same as the front - the set up is your choice!

The height of the frame is 2.3m as standard but as each frame is built to order, we are happy make it taller or shorter as you require. Please just let us know the required height when ordering by add it in the notes section.

Please note this product is a natural timber product and is hand built and finished. You may want to seal or paint the product to customise it, which is great!

Special orders on timber and finish are possible, just get in touch. POA

Designed and manufactured by climbers. Made in Sheffield.


--

The FILTH Station is a hand finished, modular base station with 27 tee-nuts designed for mounting finger boards, climbing holds and training products. It is made from 18mm FSC certified high quality birch plywood.

Please note: the Station is designed for indoor use - if you wish to use it outside, you will need to protect the ply and timber with an appropriate treatment/paint. Please get in touch if you have any questions.

As this product is made to order, your Freestanding FILTH Station takes 5-10 working days to manufacture. We will contact you if there are any unforeseen delays.

As experienced climbing wall manufacturers, builders, route setters and climbers, we pride ourselves on producing high quality long-lasting products which meet climbing wall standards. All our FILTH training products are designed by climbers and tested by climbers, so you can trust it will live up to your rigorous training regime.

The Freestanding FILTH Station has been load tested to 5.5 kN.

This product will arrive in sections and require some assembly - all necessary screws are included - even the required bit! All you need is an impact driver or drill driver and about 10 minutes to get training.

For a bespoke configuration please email: info@climbingwallservices.com – POA.

Station Materials: High quality birch 18mm plywood – FSC Certified – BB/CP Furniture grade as a minimum.  Quality 2 screw, tee-nuts with M10 thread (standard climbing wall configuration). Tee-nuts and ply tested to meet climbing wall standard BS EN 12572-1

Station Width: 1200mm

Station Height: 300mm

Frame Width: 1.20m

Frame Depth: 1.10m

Standard Frame Height: 2.3m (can be increased - this height is for users up to about 6ft)

Shipping price for UK mainland only (please contact us for shipping prices if in Scotland / N.I. or out of the UK)

Registered Design 6088149 - © Climbing Wall Services 2020

 

Plywood times are variable, please email before ordering for definitive times.