Description

• No T-nut? No Problem.
• Install Holds Anywhere With Screws

Setting perfect movement is no longer limited by t-nut placement. With The Lonestar you can set almost anywhere, quickly and easily with only screws.

• Only use for attaching climbing
  holds to plywood 18mm – in good condition
• Use 5mm minimum diameter wood screws
• At a minimum, 3 screws are recommended
• Screws are not as strong as a bolt – so this method can only be used on smaller and/or less positive holds
• If in doubt, check with the hold manufacturer before use
• See Escape Climbing’s website for more information. https://escapeclimbing.com/