DMM Aero Screwgate 5 Pack

S-Tec EN Forcer

More Information Buy Now

The S-Tec EN Forcer is an industrial rope access back up device that complies to the EN 12841 - 2006 Type A standard and is tested for a two person rescue load. This is the device we mainly use for rope access jobs and Route Setting - and we like it! Simple robust design and...

£115.00 inc. Tax
Saken Nature Bench

More Information Buy Now

The Crash Pad Bench from Saken Nature has been designed for the ultimate in flatpack comfort - it's even comfy without a bouldering pad. The bench arrives flatpack but slots together with ease so no tools are required for assembly. Free shipping! (UK Mainland) Materials: High quality birch 18mm plywood - FSC Certified - BB/CP Furniture grade...

£255.00 inc. Tax
Climbing Wall Panel: 600x600 with tee-nuts - seconds

More Information Buy Now

18mm Plywood Panel 600mm x 600mm with tee-nuts for board building. Seconds – these panels are exactly the same as our usual panels just with a few minor cosmetic imperfections and minor variations in size - just a couple of mm out. Please note: these are hand finished untreated panels designed for indoor use - if...

£16.50 inc. Tax
The FILTH Station - Freestanding

More Information Buy Now

A freestanding version of the FILTH Station – a mounting station for finger boards, climbing holds and training products - with a made to measure height, just for you. The standard frame comes with one FILTH mounting board on the front face, but if you would like a stepped/off-set training face just add a second board...

£320.00 – £347.00 inc. Tax
The FILTH Edge

More Information Buy Now

The FILTH Edge is a simple and effective training tool - with not one, not two, but THREE edges! Top Edge: at 28mm this is a friendly, warm-up edge Middle Edge: your standard 20mm (with radius) training edge Bottom Edge: at a spicy 10mm (with radius) or 6mm (without radius), this edge is to...

£46.00 inc. Tax
The FILTH Station

More Information Buy Now

The FILTH Station – a mounting station for finger boards and climbing holds. This version is designed to be mounted above a door frame, and includes screws for mounting into structural timber. EXTRA WIDE: at 1200mm wide you get even more space to attach your training equipment EXTRA DEEP: with 36mm risers, the Station sits...

£68.00 inc. Tax
3.0 x 16mm T10 Torx Self Drilling Screws with BIT

More Information Buy Now

Fully Threaded Torx Head Self Drilling Screws with T10 Bit Screw Head: T10 Screw Length: 16mm Screw Size: 3.0 Material: zinc Plated Hardened Steel C1022(10B21) Qty: 1 box of 200 screws (by weight) plus T10 Bit

£1.99 inc. Tax
Climbing Wall Panel: 600x600 bare

More Information Buy Now

18mm Plywood Panel 600mm x 600mm bare for board building. Please note: these are hand finished untreated panels designed for indoor use - if you wish to use them outside, you will need to protect the ply with an appropriate treatment/paint. Please get in touch if you have any questions.

£15.00 inc. Tax
Climbing Wall Panel: 600x600 with tee-nuts

More Information Buy Now

18mm Plywood Panel 600mm x 600mm with tee-nuts for board building. Please note: these are hand finished untreated panels designed for indoor use - if you wish to use them outside, you will need to protect the ply with an appropriate treatment/paint. Please get in touch if you have any questions.

£23.00 inc. Tax
The Lonestar

More Information Buy Now

No T-nut? No Problem. Install Holds Anywhere With Screws Setting perfect movement is no longer limited by t-nut placement. With The Lonestar you can set almost anywhere, quickly and easily with only screws. Only use for attaching climbing holds to plywood 18mm - in good condition Use 5mm minimum diameter wood screws At a minimum, 3...

£0.41 inc. Tax
M10 50mm Countersunk Climbing Hold Bolt

More Information Buy Now

M10 Countersunk Bolt - 50mm 6mm head Zinc Plated Fully Threaded DIN 7991

£0.20 inc. Tax
M10 Round Back Tee - Nut for Climbing Holds

More Information Buy Now

We have been using these T nuts for a number of years and think they provide a great option for most type of hold placements - Fully tested to BS EN 12572-1/2 (12kn) - Climbing Wall Standard - (with 18mm birch plywood). Please note: we are expecting these to be back in stock by July...

£0.18 inc. Tax

Basket
Filters

Filters

show blocks helper

Price: —

Categories
Product Categories
Accessories

Ascenders

Back Up Devices

Bags

Belay Devices

Books

Carabiners & Connectors

Climbing Hold Bolts

Climbing Holds

Climbing Wall Anchors

Climbing Wall Panels

Courses

Descenders

Fall Arrest

Hardware and Tools

Harnesses

Helmets

Home Climbing Walls

Instructor & Group Equipment

Plywood Volumes

Pulleys

Resins

Rope

Route Setting Shoes

Saken Nature Furnishings

Screws

Training Boards

Uncategorised

Working at Height

Showing 10–18 of 33 results

Read more

DMM Aero Screwgate 5 Pack

£41.35 inc. Tax

Add to basket

DMM Alpha Steel Gym Quickdraw – 12cm

£15.00 inc. Tax

Add to basket

DMM Alpha Sport Quickdraw 5 Pack

£107.50 inc. Tax

Add to basket

M10 Pear Shaped – Maillon -Quick Link – 316 Stainless

£17.06 inc. Tax

Add to basket

DMM Alpha Sport Gym 5 Pack – 12CM

£75.00 inc. Tax

Add to basket

DMM 16mm Rubber Keeper

£0.75 inc. Tax

Add to basket

DMM Nylon Vari-width Webbing 12cm

£5.00 inc. Tax

Add to basket

DMM Alpha Sport Bent Gate

£10.00 inc. Tax

Add to basket

Petzl Captiv

£1.62 inc. Tax

1

2

3

4