DMM 16mm Nylon Sling 60cm

S-Tec EN Forcer

More Information Buy Now

The S-Tec EN Forcer is an industrial rope access back up device that complies to the EN 12841 - 2006 Type A standard and is tested for a two person rescue load. This is the device we mainly use for rope access jobs and Route Setting - and we like it! Simple robust design and...

£115.00 inc. Tax
Saken Nature Bench

More Information Buy Now

The Crash Pad Bench from Saken Nature has been designed for the ultimate in flatpack comfort - it's even comfy without a bouldering pad. The bench arrives flatpack but slots together with ease so no tools are required for assembly. Free shipping! (UK Mainland) Materials: High quality birch 18mm plywood - FSC Certified - BB/CP Furniture grade...

£255.00 inc. Tax
Climbing Wall Panel: 600x600 with tee-nuts - seconds

More Information Buy Now

18mm Plywood Panel 600mm x 600mm with tee-nuts for board building. Seconds – these panels are exactly the same as our usual panels just with a few minor cosmetic imperfections and minor variations in size - just a couple of mm out. Please note: these are hand finished untreated panels designed for indoor use - if...

£16.50 inc. Tax
The FILTH Station - Freestanding

More Information Buy Now

A freestanding version of the FILTH Station – a mounting station for finger boards, climbing holds and training products - with a made to measure height, just for you. The standard frame comes with one FILTH mounting board on the front face, but if you would like a stepped/off-set training face just add a second board...

£320.00 – £347.00 inc. Tax
The FILTH Edge

More Information Buy Now

The FILTH Edge is a simple and effective training tool - with not one, not two, but THREE edges! Top Edge: at 28mm this is a friendly, warm-up edge Middle Edge: your standard 20mm (with radius) training edge Bottom Edge: at a spicy 10mm (with radius) or 6mm (without radius), this edge is to...

£46.00 inc. Tax
The FILTH Station

More Information Buy Now

The FILTH Station – a mounting station for finger boards and climbing holds. This version is designed to be mounted above a door frame, and includes screws for mounting into structural timber. EXTRA WIDE: at 1200mm wide you get even more space to attach your training equipment EXTRA DEEP: with 36mm risers, the Station sits...

£68.00 inc. Tax
3.0 x 16mm T10 Torx Self Drilling Screws with BIT

More Information Buy Now

Fully Threaded Torx Head Self Drilling Screws with T10 Bit Screw Head: T10 Screw Length: 16mm Screw Size: 3.0 Material: zinc Plated Hardened Steel C1022(10B21) Qty: 1 box of 200 screws (by weight) plus T10 Bit

£1.99 inc. Tax
Climbing Wall Panel: 600x600 bare

More Information Buy Now

18mm Plywood Panel 600mm x 600mm bare for board building. Please note: these are hand finished untreated panels designed for indoor use - if you wish to use them outside, you will need to protect the ply with an appropriate treatment/paint. Please get in touch if you have any questions.

£15.00 inc. Tax
Climbing Wall Panel: 600x600 with tee-nuts

More Information Buy Now

18mm Plywood Panel 600mm x 600mm with tee-nuts for board building. Please note: these are hand finished untreated panels designed for indoor use - if you wish to use them outside, you will need to protect the ply with an appropriate treatment/paint. Please get in touch if you have any questions.

£23.00 inc. Tax
The Lonestar

More Information Buy Now

No T-nut? No Problem. Install Holds Anywhere With Screws Setting perfect movement is no longer limited by t-nut placement. With The Lonestar you can set almost anywhere, quickly and easily with only screws. Only use for attaching climbing holds to plywood 18mm - in good condition Use 5mm minimum diameter wood screws At a minimum, 3...

£0.41 inc. Tax
M10 50mm Countersunk Climbing Hold Bolt

More Information Buy Now

M10 Countersunk Bolt - 50mm 6mm head Zinc Plated Fully Threaded DIN 7991

£0.20 inc. Tax
M10 Round Back Tee - Nut for Climbing Holds

More Information Buy Now

We have been using these T nuts for a number of years and think they provide a great option for most type of hold placements - Fully tested to BS EN 12572-1/2 (12kn) - Climbing Wall Standard - (with 18mm birch plywood). Please note: we are expecting these to be back in stock by July...

£0.18 inc. Tax

Basket
Filters

Filters

show blocks helper

Price: —

Categories
Product Categories
Accessories

Ascenders

Back Up Devices

Bags

Belay Devices

Books

Carabiners & Connectors

Climbing Hold Bolts

Climbing Holds

Climbing Wall Anchors

Climbing Wall Panels

Courses

Descenders

Fall Arrest

Hardware and Tools

Harnesses

Helmets

Home Climbing Walls

Instructor & Group Equipment

Plywood Volumes

Pulleys

Resins

Rope

Route Setting Shoes

Saken Nature Furnishings

Screws

Training Boards

Uncategorised

Working at Height

Showing 1–9 of 33 results

Add to basket

DMM 16mm Nylon Sling 60cm

£4.99 inc. Tax

Add to basket

Oval Screwgate Steel 10mm

£5.38 inc. Tax

Add to basket

Rhino HMS Screwgate

£14.99 inc. Tax

Add to basket

DMM 12mm Klettersteig Locksafe – Auto Belay Mounting Carabiner

£18.50 inc. Tax

Add to basket

DMM 10mm Equal-D Steel Locksafe

£13.00 inc. Tax

Add to basket

M10 Pear Shaped – Maillon – Quick Link

£7.00 inc. Tax

Read more

PETZL Sm’D TRIACT-LOCK

£14.80 inc. Tax

Add to basket

PETZL SWIVEL S

£53.82 inc. Tax

Add to basket

M8 – Maillon – Quick Link – 316 Stainless

£8.66 inc. Tax

1

2

3

4